Pumping station
The Victorian Abbey Mill pumping station on the London trunk sewerage system - no longer in use. |
Contents |
[edit] Introduction
A pumping station is a facility designed to draw and transfer fluids (such as water or sewage) from one location to another. This may be required in low lying areas when the location of the facility prevents the use of just gravity to lift the fluids for distribution.
Pumping stations are sometimes called pumphouses (when associated with irrigation systems or drilled wells), package pumping stations or packaged pumping stations (when used to describe private pumping stations) or lift stations (when describing systems designed for pumping waste or sewage). A pumping station may also be part of a hydroelectric facility.
[edit] Types of pumping stations
Pumping stations can be installed in situations such as; housing estates, healthcare or education campuses, commercial sites, industrial parks and so on. They may even be used for personal residences (such as in situations where a sewer passes over an incline). Depending on their application, facilities may use components including pumps, tanks (also referred to as collection chambers or wet wells), float switches, controllers, pipework and other mechanical devices.
The ornate interior of the Victorian Crossness pumping station. |
[edit] Canal water supplies
In situations where the location of the canal may not be able to reliably maintain the water levels needed to operate the locks, pumping stations may be used to draw water from other locations into the higher levels of the canals. Pumping stations may also be used to transport water from the low locks to the upper locks. This type of arrangement may be referred to as a back pumping system.
[edit] Land drainage
Water pumping stations are sometimes used to drain water from low lying areas that would otherwise be saturated and unsuitable for agriculture. This method may be deployed due to challenges brought on by elevation factors that prevent the use of canals.
[edit] Wastewater pumping stations
These systems are designed to transport waste or sewage material. The material is collected in a chamber (or wet well) until it reaches the level where the pump is activated.
[edit] Private pumping stations
These systems were once used by privately run developments or associations to transport surface water or waste water to a higher elevation.
In 2010, the Government decided that most private pumping stations that form part of the sewer or lateral drain systems that connect to the public sewer network should be transferred to the ownership of the regulated sewerage companies in England and Wales. The deadline for these transfers (referred to as pumping station adoptions) was October 2016.
Ref [[w/index.php?title=W/index.php%3Ftitle%3DW/index.php%3Ftitle%3DW/index.php%3Ftitle%3DW/index.php%3Ftitle%3DRef_https://www.ofwat.gov.uk/publications/transfer-of-private-sewers/%26action%3Dedit%26redlink%3D1%26action%3Dedit%26redlink%3D1%26action%3Dedit%26redlink%3D1%26action%3Dedit%26redlink%3D1&action=edit&redlink=1|https://www.ofwat.gov.uk/publications/transfer-of-private-sewers/]]
[edit] Related articles on Designing Buildings
- Civil Engineering during the Industrial Revolution in Britain.
- Filtration.
- How canals work.
- Ofwat.
- Sewerage.
- Thames tideway tunnel
- The redevelopment of Leicester's sewerage system by Joseph Gordon.
- Water Industry (Scotland) Act 2002.
- Water pressure.
[edit] External resources
Featured articles and news
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.
CIOB photographic competition final images revealed
Art of Building produces stunning images for another year.
HSE prosecutes company for putting workers at risk
Roofing company fined and its director sentenced.
Strategic restructure to transform industry competence
EBSSA becomes part of a new industry competence structure.
Major overhaul of planning committees proposed by government
Planning decisions set to be fast-tracked to tackle the housing crisis.
Industry Competence Steering Group restructure
ICSG transitions to the Industry Competence Committee (ICC) under the Building Safety Regulator (BSR).
Principal Contractor Competency Certification Scheme
CIOB PCCCS competence framework for Principal Contractors.
The CIAT Principal Designer register
Issues explained via a series of FAQs.